FlukeIn stock
Stocked in Deira, Dubai
Fluke Supplier in Dubai, UAE
Fluke builds the handheld test instruments that UAE electrical specifications tend to name by model number: the 87V, the 117, the 376 FC. The appeal is not the feature list but the safety rating and the survival rate — CAT III and CAT IV instruments that keep reading accurately after being dropped off a ladder.
Fluke products in stock
Which Fluke instruments we hold
One hundred and seventy-seven Fluke lines sit in our Deira stockroom, across twelve families. That breadth is the point: an engineer specifying a job can usually source the meter, the clamp, the calibrator and the leads on one order, from the shelf rather than from a lead time.
Multimeters
87V, 87V MAX, 88V, 115, 116, 117, 787B, 789, 1577, 1587 FC
The 87V is the model UAE electrical specifications name most often. The compact 115, 116 and 117 suit one-handed work up a ladder, while the 1577 and 1587 FC put a megohmmeter and a true-RMS meter in one housing.
Browse the categoryClamp meters
323, 324, 325, 375 FC, 376 FC, 378 FC, 381, 369 FC, 771, 772, 773
The 376 FC and 378 FC take iFlex probes where a jaw will not close around the conductor. The 771 to 773 read milliamp loops without breaking the circuit, and the 369 FC is built for chasing leakage.
Browse the categoryProcess calibration
705, 707, 709H, 712B, 714B, 718, 719 PRO, 724, 725, 726, 754
Loop, pressure and temperature calibrators for instrument technicians, plus the 725, 726 and 754 multifunction units that cover a whole commissioning round without changing boxes.
Browse the categoryThermal & acoustic imaging
PTi120, TiS20+, TiS20+ MAX, TiS55+, 279 FC, ii900, ii910
From the pocket-sized PTi120 up to the TiS55+. The ii900 and ii910 acoustic imagers locate compressed-air leaks and partial discharge by sound, from a distance and without a shutdown.
Browse the categoryPower quality & energy
1770 Series, 1773, 1775, 1777, 1732, 1734, 1736, 1738, MDA-550 III
Three-phase analysers and energy loggers for load studies, harmonics and billing disputes, with the MDA-550 III for motor drive diagnostics.
Browse the categoryElectrical testers
1AC II, 2AC, LVD2, T90, T110, 9040, 9062, BT510, BT520, BT521
Voltage detectors and phase rotation testers for the first check on any job, plus the BT510 series for battery string maintenance in UPS and telecom rooms.
Browse the categoryTemperature measurement
59 MAX, 62 MAX, 561, 568, 568 Ex, 51 II, 52 II, 53 II, 54 II, 971
Infrared thermometers for quick surface checks, and the 50 Series reference thermometers where a traceable contact reading is what the report needs.
Browse the categoryEarth ground & installation
1662, 1663, 1664 FC, 1621, 1623-2, 1625-2, 1630-2 FC, SMFT-1000, IRR1-SOL
Installation testers for fixed-wiring certification, earth testers including the 1630-2 FC clamp for live loops, and the SMFT-1000 with IRR1-SOL for solar commissioning.
Browse the categoryEnvironmental meters
922, 922 KIT, 925, 941, 945, 985, 820-2
Anemometers for airflow balancing and duct commissioning, plus light, sound and air-quality meters for indoor environment surveys.
Browse the categoryVibration & alignment
805 FC, 810, 835, OPTALIGN smart, OPTALIGN touch, SHAFTALIGN touch
Handheld vibration meters for screening bearings on a round, and the PRUFTECHNIK laser alignment systems for shaft, belt and bore work.
Browse the categoryInsulation testers
1503, 1507, 1550C, 1555
The 1503 and 1507 for routine megohmmeter checks on cables and motors; the 1550C and 1555 where the test voltage has to reach ten kilovolts.
Browse the categoryTest accessories
TL75, TL175, i400
Silicone test leads, the TL175 twist-guard set that replaces four probe tips, and current clamps that turn a multimeter into a current meter.
Browse the categoryBuying from our counter in Deira
Collect the same day
Shop No. 06, Al Murar Building, behind West Hotel on Naif Road, Deira. Open Monday to Saturday, 08:00 to 19:00. Message the model number ahead and we will have it on the counter when you arrive.
Delivered UAE-wide
Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. Most deliveries land in one to two working days, and the date is confirmed on the quotation rather than estimated after you order.
Quoted the same day
Send a model number on WhatsApp to +971 56 980 1810 or call +971 4 272 5786. For projects, send the BOQ as it is and we will price it line by line, flagging anything that needs a substitute.
Where we sit in the supply chain
We are a supplier and stockist, not an authorised Fluke distributor, and we do not claim otherwise. What we offer instead is breadth and speed: Fluke sits beside Megger, Hioki, Kyoritsu, Mitutoyo and Uni-T on the same shelves, so a mixed test-equipment order does not become four purchase orders with four delivery dates. We have traded from Naif Road since 2013. If authorised-channel paperwork is a condition of your purchase order, tell us before you order so you are not caught out.
Fluke — common questions
Which Fluke models do you keep in stock?
Everything listed on this page — 177 Fluke lines across twelve families. The fastest-moving are the 87V and 117 multimeters, the 376 FC clamp meter, the TiS20+ thermal camera and the 1587 FC insulation multimeter. If a model is not listed, send us the number and we will quote it.
Which Fluke multimeter should a UAE electrician buy?
For building services and fit-out, the 117: its low-impedance mode deals with the ghost voltages on long cable runs. For motors, drives and switchgear, the 87V. For general maintenance, the 179.
Which Fluke clamp meters measure DC current?
In the 320 series, only the 325. The 374 FC, 375 FC, 376 FC and 377 FC are also AC/DC clamps. For solar strings, use the 393 FC, which is rated CAT III 1500 V DC.
Which Fluke thermal camera is best for electrical inspection?
For panels you can get close to, the TiS series is usually enough. For high or distant targets, choose more detector resolution, such as the Ti401 PRO or Ti480 PRO.
Which Fluke insulation tester covers DEWA work?
For low-voltage installations a 1000 V instrument covers it, so the 1503 or 1507. Move to the 1550C or 1555 only for medium-voltage cable, switchgear and large machines.
Does Fluke sell a separate loop tester or RCD tester?
In this range, loop and RCD testing are built into the 1660 series. The 1662, 1663 and 1664 FC all do both, along with continuity and insulation.
Are you an authorised Fluke distributor?
No. We are an independent supplier and stockist. We buy and resell, which is why we can hold Fluke alongside Megger, Hioki, Kyoritsu, Mitutoyo and Uni-T rather than carrying a single brand. If authorised-channel paperwork is a condition of your purchase order, tell us before you order so you are not caught out.
Can I collect from your Deira shop today?
Yes. The counter is at Shop No. 06, Al Murar Building, behind West Hotel on Naif Road, Deira, open Monday to Saturday, 08:00 to 19:00. Message the model number ahead on WhatsApp and we will have it ready when you arrive.
Do you deliver Fluke instruments to Abu Dhabi and Sharjah?
Yes, and to Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. Most UAE deliveries land in one to two working days. The delivery date is confirmed on the quotation rather than estimated after you order.
Can you quote against a project BOQ?
Yes. Send the sheet as it is — Excel, PDF or a photo of a marked-up printout — and we will price it line by line, flag anything that needs a substitute, and mark what is on the shelf against what has to be brought in.
What is the lead time on a Fluke model you do not have?
It depends on the model and where it ships from, so we confirm a date with the quotation rather than quoting a generic lead time up front. If the timing does not suit your programme, we will tell you what we hold that does the same job.
How do I get a price?
Send the model number by WhatsApp to +971 56 980 1810, call +971 4 272 5786, or use the quote form on any product page. Prices on test instruments move with specification and quantity, so we quote rather than publish a figure that would be out of date by the time you read it.
Read next
Other brands
We supply 16 manufacturers across test instruments, safety equipment and tools. See all brands.
Send us a model number. We’ll send back a price.
If it is on the shelf you hear back immediately. If we need to source it, two to four working hours — not the two days everyone else quotes.