Shop No. 06, Al Murar Bldg., B/H West Hotel, Naif Road, Deira, Dubai
Test and measurement instruments, personal protective equipment and trade-grade tools — stocked at our counter on Naif Road, Deira and delivered across the UAE.
Handheld digital multimeters for electrical installation, maintenance and commissioning work. True-RMS models read accurately on drives, dimmers and switching supplies, where an averaging meter quietly reports the wrong number. Choose by safety rating first: CAT III 600 V is the working minimum for distribution boards, CAT IV for supply-side work.
Clamp meters measure current without breaking the circuit, which is why they live on the belt rather than in the van. Jaw size decides what fits, so check the conductor before the feature list — and where the cable will not fit the jaw, a flexible probe extends the range to busbars and tight bundles.
Insulation testers prove that cable insulation is intact rather than merely assumed to be, applying a known test voltage and measuring the resistance that results. Essential for commissioning, periodic inspection and tracing intermittent earth faults on motors and long cable runs.
Process calibration tools source and measure the signals that instrumentation runs on: 4-20 mA loops, pressure, temperature and voltage. Used to prove a transmitter reads true before a plant is handed over, and to settle arguments about which instrument in a loop has drifted.
Power quality analysers and energy loggers record what a supply is actually doing over hours or weeks — harmonics, sags, swells, imbalance and consumption. The instruments to reach for when equipment fails intermittently and nobody can be standing there when it happens.
Thermal imaging cameras find the heat that signals a problem — a loose termination, an overloaded phase, a failing bearing — without taking anything apart or shutting anything down. Acoustic imagers do the same job for compressed air leaks and partial discharge.
Vibration testers and laser alignment tools catch rotating-machinery faults while they are still cheap to fix. Misalignment and imbalance account for a large share of bearing failures, and both are measurable long before anything sounds wrong.
Temperature measurement from a quick infrared spot check to a reference thermometer used for calibration. Infrared reads surfaces without contact, probes read what is inside, and humidity meters cover the building-services work where the two have to be considered together.
Environmental meters measure the conditions people work in and equipment depends on: air velocity and volume, sound level, light level and rotational speed. Standard kit for HVAC commissioning, indoor air quality surveys and workplace assessments.
Electrical testers answer the question that matters most on site: is it live? Two-pole voltage detectors and non-contact testers prove a circuit dead before work starts, and phase rotation testers confirm sequence before a motor is energised in the wrong direction.
Earth ground testers and multifunction installation testers verify that an installation is safe to energise and stays safe. Earth electrode resistance, loop impedance, RCD operation and continuity — the measurements that fill in a test certificate.
Cable certifiers and network testers verify structured cabling to the standard the client is paying for, producing the test results a warranty depends on. For data centre, office fit-out and campus installations where a handover pack is part of the contract.
Test leads, probes, current clamps and cases — the parts that wear out, get lost or turn out to be missing on the morning of a job. Matching accessories to the instrument matters: a lead with the wrong category rating quietly undermines the rating of the meter it is plugged into.
Tools that go to site rather than to a bench: laser distance meters and levels for setting out, borescopes and inspection cameras for getting inside what cannot be opened, and the manifolds, leak detectors and vacuum gauges that air conditioning service work runs on.
Test equipment for substations and high-voltage plant: circuit breaker analysers, relay and primary injection test systems, transformer diagnostics, partial discharge monitoring, cable fault location and motor testing. Specialist instruments for utilities, commissioning contractors and industrial test departments rather than general electrical work.
Dimensional metrology for workshops, machine shops and quality departments: calipers, micrometers, dial and digital indicators, height and bore gauges, and the stands and gauge blocks everything else is set against. Measured in hundredths and thousandths of a millimetre rather than in the units the rest of the catalogue works in.
The consumables and hardware a site runs on rather than the instruments that test it: fasteners and anchors, adhesives and sealants, plumbing fittings, electrical installation accessories, paint tools, welding consumables, locks and door hardware, and the cones, barriers and signage that keep a work zone safe.
Packaging and material handling for warehouses, workshops and despatch: tapes, films, strapping, protective packaging, bags and cartons, plus the slings, shackles and ropes used to lift and secure a load.
Personal protective equipment and site safety products for construction and industrial work: helmets, gloves, eye and face protection, respiratory protection, safety footwear, high-visibility clothing, coveralls, harnesses, cones, barricades and signage.
Hand and power tools for daily trade use — spanners, pliers, screwdrivers, striking and cutting tools, measuring and marking, tool storage and power tool accessories. Trade-grade brands chosen because they are bought again rather than replaced under warranty.
If it is on the shelf you hear back immediately. If we need to source it, two to four working hours — not the two days everyone else quotes.
